Quantum Technologies offers five major pieces of
equipment as well as replacement parts:
| Type of Equipment | Product Name | Catalog No. |
|---|
| Ozone Generator Compression Systems | Ozone Caddy, Includes Ozone Generator and Analyzer | 400 |
|---|
| Ozone Cart, Single Cylinder, Includes Ozone Generator and Analyzer | 401 |
|---|
| Ozone Cart, Dual Cylinder, Includes Ozone Generator and Analyzer | 402 |
|---|
| Ozone Bleaching Accessories | Mark V Upgrade Kit
- Ozone Sequencer, Ozone Seal Kit, Lid Separator Plate, Lid Auto Valve, and
Lid Injection Port
| 410 |
|---|
| Ozone Seal Kit
- 2 Silicon Bowl O-Rings, 2 Teflon Bowl Oil Seals, 8 Large Silicone Valves Seals, 8 Small Silicone Valves Seals, 1 Tube Krytox Lubricant
| 411 |
|---|
| Ozone Residual Traps | 412 |
|---|
| Krytox Ozone Resistant Lubricant | 413 |
|---|
| FV Extension and Rotor for 2 Liter Bowl (adds 3 Liters of Free Volume) | 414 |
|---|
| FV Extension and Rotor for 4 Liter Bowl (adds 3 Liters of Free Volume) | 415 |
|---|
| Type of Part | Product Name | Catalog No. |
|---|
Bowl, Rotor, and Shaft Related When using Ozone, Silicone Bowl O-Rings and Teflon Bowl Oil Seals are needed. These O-Rings and seals can also be used in any bleaching stage. If no ozone is being used, Viton® is suitable. | Bowl O-Rings (Silicone) | 501 |
|---|
| Bowl O-Rings (Viton®) | 502 |
|---|
| Bowl Oil Seals (Teflon) | 503 |
|---|
| Bowl Oil Seals (Viton®) | 504 |
|---|
| Clear Acrylic Lid | 505 |
|---|
| Drain Screen (Stainless Steel) | 506 |
|---|
| Drain Screen (Titanium) | 507 |
|---|
| Injection Port (1/2" Titanium) | 508 |
|---|
| Lid Gauge (Perma-Cal) | 509 |
|---|
| Lid Screen (Stainless Steel) | 510 |
|---|
| Lid Screen (Titanium) | 511 |
|---|
| Millboard Bowl Spacer | 512 |
|---|
| Rotor (Hastelloy, 2-Liter) | 513 |
|---|
| Rotor (Hastelloy, 4-Liter) | 514 |
|---|
| Rotor (Stainless Steel, 2-Liter) | 515 |
|---|
| Rotor (Stainless Steel 4-Liter) | 516 |
|---|
| Rotor (Titanium, 2-Liter) | 517 |
|---|
| Rotor (Titanium, 4-Liter) | 518 |
|---|
| Rotor Cap Screw (Stainless Steel) | 519 |
|---|
| Rotor Cap Screw (Titanium) | 520 |
|---|
| Shaft (Hastelloy) | 521 |
|---|
| Shaft (Stainless Steel) | 522 |
|---|
| Shaft (Titanium) | 523 |
|---|
| Shaft Bearing | 524 |
|---|
| Control Panel Related | Fuse (ajt- 20) | 534 |
|---|
| Fuse (fngr-4) | 535 |
|---|
| Fuse (kldr-4) | 536 |
|---|
| Inverter (Magnetek) | 537 |
|---|
| Timer (One Set Point) | 538 |
|---|
| Timer (Two Set Points) | 539 |
|---|
| Heater Bands | 549 |
|---|
| Heating System Related | Temperature Controller (Fenwal) | 550 |
|---|
| Temperature Controller (Love) | 551 |
|---|
| Thermocouple | 552 |
|---|
| Thermocouple Compression Fitting | 553 |
|---|
| Hydraulic System Related | Hydraulic Cylinder | 554 |
|---|
| Hydraulic System Relief Valve | 555 |
|---|
| Hydraulic Pump (Olidyne) | 556 |
|---|
| Injection System Related | Air Actuated Valve | 560 |
|---|
| Injection Cylinder End Flanges Set | 561 |
|---|
| Injection Cylinder Mid Section (PVC) | 562 |
|---|
| Injection Cylinder Piston O-Rings | 563 |
|---|
| Injection Cylinder Piston with O-Rings | 564 |
|---|
| Injection Cylinder Teflon Gaskets | 565 |
|---|
| Injection Cylinder Viton® Gaskets | 566 |
|---|
| Injection Port Flange Gasket (Viton®) | 567 |
|---|
| Injection Port Flange Gasket (Teflon) | 568 |
|---|
| Injection Port Nipple (1/2" Stainless Steel) | 569 |
|---|
| Injection Port Pressure Plug (3/8" Stainless Steel) | 570 |
|---|
| Injection Port Nipple (1/2" Titanium Steel) | 571 |
|---|
| Injection Port Pressure Plug (3/8" Titanium) | 572 |
|---|
| Plug Valve (Hastelloy, 1/4") | 573 |
|---|
| Plug Valve (Stainless Steel, 1/4") | 574 |
|---|
| Solenoid Valve (3-way) | 575 |
|---|
When using Ozone, Silicone Bowl O-Rings and Teflon Oil Seals are needed. These O-Rings and seals can be used in any bleaching stage. If no Ozone is being used Viton® is suitable) | Valve O-Rings (Large, Silicone) | 576 |
|---|
| Valve O-Rings (Small, Silicone) | 577 |
|---|
| Valve O-Rings (Large, Viton®) | 578 |
|---|
| Valve O-Rings (Large, Viton®) | 579 |
|---|
| Valve O-Rings (Large, Silicone) | 585 |
|---|
| pH System Related | pH Chart Recorder | 586 |
|---|
| pH Monitor (Foxboro) | 587 |
|---|
| pH Compression Fitting | 588 |
|---|
| pH Probe Blank | 589 |
|---|
| Pressure Transducer Related | Pressure Transducer (0-200 psig, -57degrees Celsius to 93 degrees Celsius | 594 |
|---|
| Pressure Transducer (0-200 psig, -40 degrees Celsius to 149 degrees Celsius) | 595 |
|---|
| Pressure Transducer Nut and Coupling | 596 |
|---|
| Pressure Transducer Digital Readout | 597 |
|---|
![[ IMAGEMAP ]](graphics/eqmenu.gif){kind=small}